CPU
|
1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors* |
|
2. L3 cache varies with CPU |
|
* Please refer to “CPU Support List” for more information. |
Chipset
|
1. Intel® B760 Express Chipset |
Memory
|
1. Support for DDR5 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules |
|
2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
|
3. Dual channel memory architecture |
|
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
|
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
6. Support for Extreme Memory Profile (XMP) memory modules |
|
(Please refer “Memory Support List” for more information.) |
Onboard Graphics
|
Integrated Graphics Processor-Intel® HD Graphics support:
|
|
1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz |
|
* Support for HDMI 2.0 version and HDCP 2.3. |
|
2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz |
|
* Support for DisplayPort 1.2 version and HDCP 2.3 |
|
(Graphics specifications may vary depending on CPU support.) |
Audio
|
1. Realtek® Audio CODEC |
|
2. High Definition Audio |
|
3. 2/4/5.1/7.1-channel |
|
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. |
|
4. Support for S/PDIF Out |
LAN
|
1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication module
|
Intel® Wi-Fi 6E AX211
|
|
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
|
2. BLUETOOTH 5.3 |
|
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
|
(Actual data rate may vary depending on environment and equipment.) |
Expansion Slots
|
CPU:
|
|
1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16) |
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
Chipset: |
|
1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
Storage Interface
|
|
|
CPU:
|
|
1. 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
|
Chipset: |
|
1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) |
|
2. 4 x SATA 6Gb/s connectors |
|
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices |
USB
|
Chipset:
|
|
1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support |
|
2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header |
|
3. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
|
4. 1 x USB 3.2 Gen 1 port on the back panel |
|
5. 4 x USB 2.0/1.1 ports available through the internal USB headers |
|
Chipset+USB 3.2 Gen 1 Hub: |
|
1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) |
|
Chipset+USB 2.0 Hub: |
|
1. 4 x USB 2.0/1.1 ports on the back panel |
Internal I/O Connectors
|
1. 1 x 24-pin ATX main power connector |
|
2. 1 x 8-pin ATX 12V power connector |
|
3. 1 x 4-pin ATX 12V power connector |
|
4. 1 x CPU fan header |
|
5. 1 x CPU fan/water cooling pump header |
|
6. 3 x system fan headers |
|
7. 1 x system fan/water cooling pump header |
|
8. 2 x addressable LED strip headers |
|
9. 2 x RGB LED strip headers |
|
10. 2 x M.2 Socket 3 connectors |
|
11. 4 x SATA 6Gb/s connectors |
|
12. 1 x front panel header |
|
13. 1 x front panel audio header |
|
14. 1 x USB Type-C® header, with USB 3.2 Gen 2 support |
|
15. 1 x USB 3.2 Gen 1 header |
|
16. 2 x USB 2.0/1.1 headers |
|
17. 2 x Thunderbolt™ add-in card connectors |
|
18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
|
19. 1 x reset button |
|
20. 1 x Q-Flash Plus button |
|
21. 1 x Clear CMOS button |
|
22. 1 x reset jumper |
Back Panel Connectors
|
1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support |
|
2. 1 x USB 3.2 Gen 2 Type-A port (red) |
|
3. 3 x USB 3.2 Gen 1 ports |
|
4. 4 x USB 2.0/1.1 ports |
|
5. 2 x SMA antenna connectors (2T2R) |
|
6. 1 x HDMI port |
|
7. 1 x DisplayPort |
|
8. 1 x RJ-45 port |
|
9. 1 x optical S/PDIF Out connector |
|
10. 2 x audio jacks |
I/O Controller
|
1. iTE® I/O Controller Chip |
H/W Monitoring
|
1. Voltage detection |
|
2. Temperature detection |
|
3. Fan speed detection |
|
4. Water cooling flow rate detection |
|
5. Fan fail warning |
|
6. Fan speed control |
|
* Whether the fan speed control function is supported will depend on the cooler you install. |
BIOS
|
1. 1 x 256 Mbit flash |
|
2. Use of licensed AMI UEFI BIOS |
|
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features
|
1. Support for GIGABYTE Control Center (GCC) |
|
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
|
2. Support for Q-Flash |
|
3. Support for Q-Flash Plus |
Bundled Software
|
1. Norton® Internet Security (OEM version) |
|
2. LAN bandwidth management software |
Operating System
|
1. Support for Windows 11 64-bit |
|
2. Support for Windows 10 64-bit |
Form Factor
|
1. Micro ATX Form Factor; 24.4cm x 24.4cm |
There are no reviews yet.